APPLICATION
Spray volume Use a spray volume of 10 to 15 gallons or more per acre and apply with calibrated ground equipment. Do not apply less than 10 gallons of total spray volume per acre. In general, increase spray volume as crop canopy, height and weed density increase to obtain adequate spray coverage. 3 Special note on tank mix of Enlist One ® + glufosinate: Use a spray volume of 15 to 20 gallons per acre. Do not apply less than 15 gallons of total spray volume per acre. Spray rate Use spray rates from the product labels when weeds are shorter than 6 inches and crops are within the appropriate growth stage window. Enlist Duo ® herbicide: Spray 4.75 pt./A. Enlist One herbicide: Spray 2 pt./A. Spray pressure Use an appropriate spray pressure within the qualified range for optimum coverage. Spraying at the higher end of the labeled psi will provide better coverage. Ground speed, product volume and nozzle selection all factor into the appropriate spray pressure.
Boom height To minimize spray drift potential, maintain a boom height as specified by the nozzle manufacturer, usually 24 inches or less above crop canopy. 4
AFTER SPRAYING
Cleanout After applying an Enlist ® herbicide, follow the proper steps to clean out your sprayer. Triple-rinse is required for all cleanouts unless the next crop you are spraying is glyphosate-resistant corn.
Scan the QR code to find the full application guide for Enlist ® herbicides.
3 May require a broader management plan including timely application and use of a soil residual herbicide. 4 Always read and follow the product label as well as state and local requirements.
31
Made with FlippingBook Digital Proposal Creator